Fujikura Series Splicing Machine

The 28s is designed for high-end FTTH splicer applications in FTTX, Data Center / LAN and Access Networks.28s offers an active V-Groove alignment single fibre splicer for reliable and improved splicing performance for a range of different fibres; SMF, MMF, DSF, NZDSF. Applicable from 125μm cladding diameter/up to 3mm sheath diameter fibres with sheath clamp. 28s provides advanced capabilities; including splice result storage of 200 splices, 5-16mm short cleave length splicing .

Features

• Active V-groove fibre alignment
• Touch Panel With Easy Operation 
• Simple Lightweight Carrying Case For Good Mobility 
• The World’s Smallest & Lightest Active V-groove Splicer
• tube heating cycles per full battery charge
• Robust and lightweight design plus shock, dust and rain resistant
• Multi-functional carry case and work table accessory.

The 66S is a core alignment fusion splicer equipped with PAS( Profile Alignment System) for precise core to core fiber alignment for consistence low splice loss and accurate splice loss estimation regardless of fiber type or quality. The Fujikura 66S has series of features, “Easy sleeve positioning” for quicker splicing cycle. It equips 5 inches size LCD monitor with touch screen. Fujikura 66S design, compact size and light weight enables to carry it and use in various environment conditions.

Fujikura 88S is a new core alignment Fusion splicer with Faster automation feature. The faster automated feature of 88S fusion splicer reduces installation times.The 88S fusion splicer automatically identifies the optimum arc discharge parameters in accordance with the fiber type. The sheath clamp of the 88S fusion splicer is compatible with loose tube fiber. The 88S fusion splicer and CT50 fiber cleaver are enabled with wireless data connectivity. This capability allows automatic cleaver blade rotation when the splicer judges the blade is worn. Also, the 88S fusion splicer can connect to two CT50s simultaneously.

True Core Alignment
Core Alignment Technology The 88S fusion splicer has high precision lenses which provide an accurate core to core alignment regardless of core-cladding concentricity error. Also, the lenses allow the splicer to discriminate between fiber types.

Advanced Image Processing Technology
The 88S possesses advanced image processing technology which analyzes the profile of the fiber image as a brightness pattern. The 88S finds the true core position and achieves the consistent lower splice loss.

Fiber Discrimination Function
The 88S fusion splicer automatically identifies the optimum arc discharge parameters in accordance with the fiber type.

Faster Automation
The faster automated features of the 885 fusion splicer reduce installation times. With this splicer, an operator can complete the entire splicing process from splicing to heating without touching the 88S and only moving the fiber The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out. The retention clamps release when the fiber is lifted by the operator.